Additional Features
Weight
100-250 Grains
Nine weight options so hunters can achieve their desired front of arrow mass.
Cutting Diameter
Total Cut: 2 1/8"
Main Blade: 1 3/8" | Bleeder Blade: 3/4"
The Wide main blade creates a devastating wound channel and heavy blood trail for a short and quick recovery on tight parcels. A bleeder blade opens up the wound channel to take blood trails to the next level. Even with the wider surface area, tight tolerances ensure precision accuracy so you can confidently hit your mark up to fifty yards away.
Double Bevel vs Single Bevel
Double bevel broadheads feature two bevels on each blade edge that have equal pressure causing the arrow to drive straight through the animal as efficiently as possible. Iron Will Single Bevels feature a single beveled edge on both their main blade and bleeder blade. The pressure on single bevels causes arrows to continue to rotate through the animal.
Standard Threads
Most arrows require Standard (8-32) Threads.
Deep Six Threads
Deep Six Threads are designed to fit 4mm micro diameter shafts with HIT inserts that use the Deep Six thread pattern. Purchase the Deep Six variant if you plan to use them with Deep Six HIT Inserts in micro 4mm shafts.
Snyder Core Variant
Engineered in conjunction with Aron Snyder, ferrules on Snyder Core broadheads sit deeper in micro diameter arrow shafts to bolster their impact strength. Choose a Snyder Core option only if your arrows are set up to conform with the Snyder Core System.
Buff Broadheads
For hunters that want a strict two blade broadhead with no bleeder, the Buff option is for you. Buff broadheads are ideal when maximum penetration is desired above all else.
Patented
Tanto Tip
For maximum impact strength, Iron Will’s patented blade geometry includes a Tanto Tip on the end of each broadhead. By widening the tip as compared to more traditional broadheads, extra bone splitting strength and rigidity is added, preventing the bending or breaking that saps momentum and stops arrows in their tracks. Additionally, the Tanto Tip reduces surface area for greater accuracy at long distances. US Patent 10,054,409
.062" Thick A2 Tool Steel
Sharp + Stout Blades
Iron Will broadheads are engineered to be extremely sharp and stay that way. A2 Tool Steel, commonly used in metal stamping dies to cut other steels, has an unmatched combination of impact toughness and edge retention. We cryogenically treat and triple temper to a hardness of 60HRC producing edges that remain honed all the way through the target. This unmatched edge retention requires less force for a complete pass-through. Sharpened back bevels deliver your trophy with maximum internal hemorrhaging for great blood trails. Resharpen these broadheads for reliability hunt after hunt.
Hardened Ferrule
Grade 5 Titanium (for lighter heads) and hardened stainless steel (for heavier heads) ensures the broadhead stands firmly aligned with the arrow at impact. This aligns the arrow’s momentum to drive through the animal instead of flexing and displacing momentum sideways.
Customer Reviews
Based on 180 reviews
96%
(172)
2%
(4)
1%
(2)
0%
(0)
1%
(2)
R
Wide series single bevel 150 grain broadheads are unstoppable.
The flight is perfect out to 100 yards, identical to field points after careful tuning.
In 9 months:
Elk at 40 yards
Canada Moose at 55 yards
Mountain Goat at 12 feet
Whitetail (multiple) from 12 to 40 yards
Mule Deer at 70 yards
Alaskan Brown Bear at 17 yards
C
J
Tried wide series for my youth kids. Received the broadheads today (3 days later than expected). Very dull and must be sharpened before use. Not even close to shaving hairs off my arm. I would expect them to arrive very sharp considering how much they cost. Time will tell how durable they are, but I can buy replacement broadheads from other manufacturers and spend less money rather than purchasing these.
The broadheads are factory sharpened and come to you sharp. If you pulled them out and didn't think they were sharp, we have a 30 day return policy and we would have happily worked with you on a return and refund or sent you a new set after getting a look at these under our microscope to see if there were any edge concerns from the factory. This provides us an oppportunity to check out your concern as well as inform if we have any quality issues we need to address. This is what a partnership in quality should look like for products being sold. If you never contact us, or give us opportunity to understand your concern, then we cannot address your concern, nor verify if we truly have a qulaity issue with the product. So, putting up a review stating 'poor quality control' is not genuine, since you admitted to tyring to sharpen the blades which nullified your opportunity for us to help you out with your concern. We appreciate you coming here to reviews to let us know you are not satisfied with your purchase, but wish you had contacted us through customer service instead, because then we could have partnered with you on a real solution.
C
Just received the new sb wide 100 last week. Had my first chance to throw a few down range today. Slight complaint off the bat is that none of the three heads shaved hair out of the box. A bit disappointing considering the price. However, I was going to shoot them first anyway and touch them up with the iron will stone afterwards which I did. Now they are shaving hair and slicing paper. The vents have a bit of a hiss when they shoot. Probably not an issue on an animal with today's speed bows. Penetration was an 11 out of 10. Shooting a Glen del buck target that isn't that worn my arrows were fully passing through and burying in the dirt. Yikes! Can't wait to see those perform on deer. As far as accuracy goes they aren't identical with field points, BUT I am an average shooter at best and none of the hits were out of the kill zone so it was probably just me. End of the story I cannot wait to try them on whitetails.
a
I went hog hunting in Florida. We used my guide's dog. I was able to arrow 2 MONSTER hogs. One with a V-series and the other with a Wide. Both were only a 100g attached to a Black Eagle Rampage arrow. The Wide is STILL SHARP, even after passing completely through. I shot him in the shoulder through the "shield". Don't believe the hype that only heavy arrows can do the job.. You can still do damage and bag your trophy as long as a Iron Will is attached to the front.
P
Being raised a whitetail hunting in the east, I headed out west for elk with expandables. After having disappointing results with penetration I bought iron wills as a recommendation from an elk hunting guide. I got two pass throughs in a row on elk and have since changed to iron will for all hunting. I have killed lots of whitetail, mule deer, Russian boar and elk; These are the best heads money can buy. Unbelievably durable and can be often reused.
Welcome to Iron Will Outfitters, home of high-performance wide broadheads.
We are long-time avid bowhunters and engineers ourselves and, as a result, we know the critical role a trustworthy broadhead can play in a successful hunt. This is just one of the many reasons that we are highly committed to designing and crafting wide single and double bevel broadheads that deliver unmatched accuracy, penetration, and durability.
We understand that every bowhunter's arsenal requires arrow broadheads that deliver on promise and performance. With this in mind, we have designed our Wide Series Broadheads to provide maximum cutting diameter, devastating wound channels, and unmatched strength.
Our wide series broadhead collection showcases the epitome of our commitment to excellence and innovation in bowhunting equipment. These broadheads are designed with a larger cutting diameter, ensuring more significant impact and damage upon hitting the target.
Our single and double bevel broadheads are designed to cater to the diverse needs of today's bowhunters. Single bevel broadheads feature blades that are sharpened on one side. Double bevel broadheads feature blades that are sharpened on both sides, creating two cutting edges. These designs allow the broadhead to slice through hide, flesh, and bone with remarkable efficiency. It also makes them easy to sharpen, ensuring they're always ready to deliver peak performance.
Each broadhead model in our collection has been meticulously engineered and rigorously tested to ensure it meets our high standards of performance. You might also want to check out our collection of broadhead accessories.
To choose the best wide broadhead design for you, look for a product that offers superior craftsmanship.
At Iron Will Outfitters, we take pride in the superior craftsmanship of our wide broadheads. Each broadhead is precision-engineered and made from high-grade materials to ensure exceptional performance and durability. Our wide broadheads are also designed to offer optimal penetration. A2 Tool Steel main blades and bleeder blades slice through hide and tissue and stay sharp all the way through the animal, while the robust construction ensures they can power through bone.
Naturally, accuracy is also of paramount importance.
The balanced design of our broadheads enhances flight stability and accuracy. This ensures you can count on Wide Iron Will Outfitters broadheads to hit the mark up to about 50 yards away.
At Iron Will Outfitters, we believe that quality gear is key to a successful hunting experience. Our wide, double bevel broadheads are not simply hunting equipment; they're proof of our commitment to our customers and their satisfaction.
When you choose Iron Will Outfitters Wide broadheads, you're investing in a tool designed to perform under pressure, built to last, and dedicated to making every shot count.
Explore our range of Wide single and double bevel broadheads today and experience the difference Iron Will Outfitters can make in your hunting performance. From the materials we select to the careful craftsmanship we employ, every aspect of our wide series broadheads is designed with you, the bowhunter, in mind.